Cart0items

Cart

Hello GuestFor better experience login
Login
Free Shipping on orders $49+ (Lower 48 States)
0
0
Cart0items

Cart

Free Shipping on orders $49+ (Lower 48 States)
HomeShopPaint & BodyBody Shop Safe3D ACA 520 Finishing Polish

Description

3D ACA 520 Body Shop Safe Finishing Polish

3D ACA 520 is step 2 of 3D’s two-step ACA paint correction system. Step 1 is 3D ACA 500 or 3D ACA 510, the premier compounds body shops choose to work with. Whether you’re finishing out a full color-sand job at the body shop or knocking down light swirls in the detail bay, 520 takes out the holograms and swirl marks that wool pads and compounds leave behind. It comes in 8 oz, 32 oz, and 1-gallon sizes, so you can grab a bottle for touch-ups or stock up for full-time shop use.

520 uses 3D’s proprietary Alpha Ceramic Alumina (ACA) abrasive in a water-based liquid carrier. It stays cool on the paint, won’t clog your pad, and wipes off clean with almost no dust. It’s silicone-free, has no fillers, and contains no OSHA-regulated crystalline silica, so it’s safe to run in a body shop without contaminating other work. No fillers also means no dye-back (dye-back is when swirls hidden by fillers show up again after a few washes or in the sun): the shine you see under the shop lights is the shine that’s still there in the sun.

What makes this one worth keeping in the garage:

  • Step 2 of the 3D ACA system, after ACA 500 or ACA 510
  • Removes holograms, swirl marks, fine scratches, and haze left by wool pads and compounds
  • Filler-free, so dark colors don’t show dye-back later
  • Silicone-free and water-based; safe around fresh paint
  • Zero dusting and easy wipe-off keep the bay clean
  • Long buffing cycle, so it won’t dry out halfway across a panel
  • Works on clear coat, single-stage paint, and gel coat
  • Use it with a rotary or a dual-action (DA) polisher
  • VOC compliant, biodegradable, and made in the USA
  • Available in 8 oz, 32 oz, and 1 gallon

How to Use 3D ACA 520 Finishing Polish

Finish step 1 first. Take the sanding marks and deeper defects out with 3D ACA 500 X-Tra Cut Compound or 3D ACA 510 Premium Rubbing Compound, then wipe the panel clean.

Put a foam polishing or finishing pad on your polisher. A light purple foam pad or a black foam finishing pad is the pairing 3D recommends for 520.

Apply 3D ACA 520 and work the panel in overlapping passes until the holograms disappear. Wipe it off with a fresh microfiber towel. Then check the panel under an LED light held at a 45-degree angle before you sign off on it.

Set the polisher to a comfortable speed; 3D’s preferred range is 600 to 1,200 RPM. A rotary or a DA polisher will both run 520. For the finishing step, 3D prefers a DA because it is less aggressive and leaves fewer holograms.

When to Reach for 3D ACA 520

  • After any ACA compound step, for the standard two-step ACA finish
  • After any wool pad step, to clear the holograms before the car leaves the bay
  • For light swirls and wash scratches on paint that doesn’t need sanding
  • On dark colors, where a filler polish would show dye-back later

Tip: Wool pads cut fast but leave holograms, so always follow a wool step with a foam step. 3D ACA 520 on a black finishing pad is the step that clears them.

Shop more 3D compounds and polishes from Hot Wax Garage.

Hot Wax Garage hand-selected 3D for our paint correction line. Read why we chose 3D →

Safety Data Sheet: 3D ACA 520 SDS (PDF)

Why Buy From Hot Wax Garage?

Hot Wax Garage isn’t a warehouse reselling whatever’s trending — it’s run by professional auto detailers who actually use this stuff on cars, not just ship it out. We stock premium detailing products, professional-grade supplies, and car care essentials that detailers, dealerships, car washes, and restoration shops actually rely on. We also carry automotive dealer supplies; we’re an Authorized Lloyd Mats Dealer for custom-fit floor mats, and we’re building out a growing lineup of wheel center caps and accessories. If it’s on our shelves, someone here tested it or vetted it firsthand—none of it came from a supplier’s catalog sight unseen. That’s backed by fast shipping, real customer service, and fair prices. Thanks for shopping with Hot Wax Garage!

Reviews

There are no reviews yet.

Be the first to review “3D ACA 520 Finishing Polish”

Error: Contact form not found.