Hi-Tech Vortex Cleaning Gun, Vortex II Dry Air Gun V-200

Description

Hi-Tech Vortex Cleaning Gun: Blast Out Dust, Dirt, and Water With Air Alone

The Hi-Tech Vortex cleaning gun (Vortex II dry air gun, V-200) hooks up to your air compressor and spins the air into a high-velocity vortex that blasts dirt, dust, debris, and moisture out of hard-to-reach places, inside and outside the vehicle. No water and no chemicals. Detailers, body shops, dealership service departments, and motorcycle owners use it to clean and dry in a fraction of the time.

How the Hi-Tech Vortex Cleaning Gun Works

Inside the white rigid plastic cone sits a flexible, counter-weighted tube. When you squeeze the trigger, the tube whips around in a tornado-like motion, so the air covers a much wider area than a straight stream from a regular blow gun. That spinning air lifts moisture and dirt off the surface and moves it where you want it to go.

The Hi-Tech Vortex cleaning gun runs on an air compressor operating between 60 and 90 psi and connects with a 1/4″ air inlet. A trigger-style valve lets you control how much air comes out.

Hi-Tech Vortex Cleaning Gun vs. a Regular Blow Gun

A regular blow gun shoots a straight, narrow stream of air. It doesn’t control where the water or dust goes, so it blows everything around, and you end up going over the same spots again and again. It’s frustrating and slow.

The Hi-Tech Vortex cleaning gun pushes air across a large area at once and moves water and dust in a controlled way. You spend less time redoing sections you already finished.

Made for Motorcycles and Custom Bikes

Anyone who owns a motorcycle, especially an all-out custom Harley-Davidson, knows how hard it is to dry the bike spot-free. A regular air gun throws water onto the next section or back onto the part you just dried.

The Hi-Tech Vortex cleaning gun moves water off large areas at a time, so you stay in control and don’t go back over a section you already dried. It cuts drying time by more than half compared to a conventional blow gun.

What makes this one worth keeping in the garage:

• Tornado-like air covers a wider area than a straight blow gun
• Cleans and dries with air alone, no water or chemicals
• Compact size gets into tight spots in the interior and engine bay
• Works with any air compressor running 60 to 90 psi
• Trigger-style valve controls the airflow
• By far the best type of gun for cleaning foam and microfiber pads
• Replacement cones and weighted tubes are sold separately, so you can rebuild it instead of replacing it

Detailing Uses

• Blow dust, trash, and crumbs from under and between the seats
• Blow out dashboard and trim seams where dust builds up
• Clean cup holders, door panels, A/C vents, dashboards, and carpet
• Blast water out of body seams and from around windows and mirrors after a wash
• Dry seats faster after cleaning
• Dry the engine compartment so you can dress and polish engine parts
• Blow moisture out of the hood, trunk, and door jambs
• Clean foam and microfiber buffing pads
• Dry motorcycles
• Blow out interiors after paint and body work
• House construction cleanup

How to Use the Hi-Tech Vortex Cleaning Gun

Connect the Hi-Tech Vortex cleaning gun to your compressor hose and set the compressor between 60 and 90 psi. Squeeze the trigger and work in sweeping passes. Blow the debris out into the open, then vacuum it up.

Wear eye and ear protection, since the gun is made to blast debris out of tight spaces.

To clean the Hi-Tech Vortex cleaning gun, put the nozzle in a bucket of soapy water and squeeze the trigger once or twice to flush dirt out of the cone.

Specifications:

• Part number: V-200
• Free speed: 3,600 rpm
• Air consumption: 40 l/min
• Air inlet: 1/4″
• Air pressure: 60 to 90 psi (6.2 bar at 90 psi)

Replacement parts and add-ons:

• Vortex II Dry Cleaning Gun Weighted Tube Assembly
• Vortex II Cleaning Air Gun Cone
• Vortex II Dry Cleaning Replacement Cone With Metal Lining
• Vortex II Dry Cleaning Gun Brush Cone

Want the brush cone in the box? Get the Vortex II Dry Air Cleaning Gun with Brush Cone. There’s also the Vortex JR Dry Cleaning Gun (V-050). Pair the Hi-Tech Vortex cleaning gun with our SM Arnold combo detail brushes to loosen caked-in debris before you blow it out. See every part in our Vortex II Air Cleaning Gun & Parts category.

Why Buy From Hot Wax Garage?

Hot Wax Garage isn’t a warehouse reselling whatever’s trending — it’s run by professional auto detailers who actually use this stuff on cars, not just ship it out. We stock premium detailing products, professional-grade supplies, and car care essentials that detailers, dealerships, car washes, and restoration shops actually rely on. We also carry automotive dealer supplies; we’re an Authorized Lloyd Mats Dealer for custom-fit floor mats, and we’re building out a growing lineup of wheel center caps and accessories. If it’s on our shelves, someone here tested it or vetted it firsthand—none of it came from a supplier’s catalog sight unseen. That’s backed by fast shipping, real customer service, and fair prices. Thanks for shopping with Hot Wax Garage!