3D Glass Polish Cerium Oxide Scratch & Spot Remover

Description

3D Glass Polish Cerium Oxide Scratch & Spot Remover

Wiper blades drag grit across your windshield every time it rains, and hard water dries into spots that glass cleaner can’t touch. 3D Glass Polish is a cerium oxide polish made to take those marks off car windows: wiper scratches, light swirls, etched water spots, and the dull haze that builds up over the years. It comes in a 16 oz bottle, and it pairs with the 3D Glass Polishing Pads 3 Pack.

Cerium oxide is the polishing compound glass shops have trusted for years. It levels the glass surface evenly, so a light scratch gets polished out instead of filled in or covered up. Nothing in it hides the defect. When you wipe the residue off, what you see is clean, clear glass.

What makes this one worth keeping in the garage:

• Removes wiper marks, light scratches, swirls, and etched water spots from automotive glass
• Cerium oxide formula made for glass, not a paint polish
• Polishes defects out instead of filling them, so the results don’t wash off
• Clearer glass means less glare from oncoming headlights at night
• Works with a rotary polisher or an orbital polisher
• One 16 oz bottle goes a long way with a ring of product per section

How to Use 3D Glass Polish

1. Work on cool, clean glass out of direct sunlight. Shake the bottle well before and during use.
2. Clean the glass first with glass cleaner and a glass towel. An interface pad between the backing plate and the glass polishing pad is recommended.
3. Put a ring of polish in the center of the pad face. Press the pad flat on the glass and spread the product at slow speed.
4. Bring the speed up about 50%, use medium pressure, and mist water on the glass to help the polishing action.
5. As the product dissipates, wipe off the white residue with a 3D yellow microfiber towel and check the glass. Clean the pad, add fresh polish, and repeat until you get the result you want.
6. Rotary polishers: 1,500 to 2,500 RPM. Orbital polishers: high-speed setting.

When Glass Cleaner Isn’t Enough

Glass cleaner only lifts what’s sitting on top of the glass. Hard water spots that have dried in for months, and the fine scratches wipers leave behind, are part of the surface itself. That’s the job 3D Glass Polish Cerium Oxide Scratch & Spot Remover was made for. Detailers use it on dealer cars with spotted windshields, on daily drivers that sit under sprinklers, and on any car where the wipers have left an arc you can see when the sun hits it.

Tip: Run your fingernail across the scratch first. If your nail catches, the scratch is too deep for any glass polish to remove. Wash your pads after each job with 3D Towel Kleen so they keep cutting like new.

Read why we picked 3D: Why did Hot Wax Garage choose 3D as our product line for paint correction?

Safety Data Sheet: 3D Glass Polish SDS (PDF)

Why Buy From Hot Wax Garage?

Hot Wax Garage isn’t a warehouse reselling whatever’s trending — it’s run by professional auto detailers who actually use this stuff on cars, not just ship it out. We stock premium detailing products, professional-grade supplies, and car care essentials that detailers, dealerships, car washes, and restoration shops actually rely on. We also carry automotive dealer supplies; we’re an Authorized Lloyd Mats Dealer for custom-fit floor mats, and we’re building out a growing lineup of wheel center caps and accessories. If it’s on our shelves, someone here tested it or vetted it firsthand—none of it came from a supplier’s catalog sight unseen. That’s backed by fast shipping, real customer service, and fair prices. Thanks for shopping with Hot Wax Garage!